Legal Information

Applied Materials, Inc. Web Site User Agreement Terms and Conditions

ATTENTION: PLEASE READ THESE TERMS AND CONDITIONS OF USE CAREFULLY BEFORE USING THIS WEB SITE. IF YOU DO NOT AGREE TO THESE TERMS, PLEASE DO NOT USE THE WEB SITE.

Applied Materials Inc. may, without notice, at any time revise these Terms of Use and any other information contained on this site by posting same.

Use of Site/Materials/Content

The materials on this Web site ("Site") are provided by Applied Materials, Inc. (the "Company") for your personal, information, education and communication upon all the Terms of this User Agreement. The Site contains materials and other content collateral/productions relating to the Company, its products and services. The materials may be in the form of information, text, data, images, graphics, icons, animations, registered and unregistered trademarks, illustrations, photographs, audio clips, Podcasts, music, sounds, pictures, videos, Webcasts, Web-based productions, software, or other forms known or later created or invented (collectively "Content"). In using this Site, the respect of the Company's intellectual property rights outlined below is expected. Any unauthorized use of Content may violate copyright, trademark, privacy, publicity, communications and other laws, and any such use may result in your personal liability, and subject to civil and/or criminal prosecution.

Content/Copyright/Single Copy License

All Content is copyrighted, and is either owned or used with permission by the Company. Unless otherwise expressly set forth in this User Agreement, you may not copy, publish, reproduce, replicate, distribute, transmit, modify, adapt, translate, display, sell, license, publicly perform, prepare derivative works based upon, or otherwise use or exploit the Content. Unless explicitly expressed otherwise on this Site, you may download one copy of portions of the Content in temporary storage on one personal computer for your personal, non-commercial, non-political, non-network viewing and use only, provided you do not delete or change any copyright, trademark, or other proprietary notices or markings. The foregoing limited right does not grant you any ownership in any Content. Except as expressly provided herein, nothing contained in this User Agreement may be construed as conferring to you (by implication, estoppel, or otherwise) any other right or license to any Content under any Copyright or any other intellectual property rights.

Applicable Laws

This site is controlled and operated by the Company from its offices within the United States of America. The Company makes no representation that the information available is appropriate or available for use in other locations, and access to the site from territories where their contents are illegal is prohibited. Those who choose to access the site from other locations do so on their own initiative and are responsible for compliance with applicable local laws. Users may not use or export the information in violation of U.S. export laws and regulations. Any claim relating to the information shall be governed by the internal substantive laws of the State of California.

Links to/from Third Party Web Sites

This Site may provide links to other Web sites and access to content from third parties as a convenience to you and not as any endorsement of such third parties or their sites. The Company is not responsible for the content of any linked sites, including opinions, advice, statements, articles, and advertisements, and does not undertake any duty to correct or update such content. You bear all risk associated with the use of any linked sites or content.

You are granted a limited, non-exclusive, revocable right to create hyperlinks to this Site provided that: (a) the links are only to the Homepage of this Site; www.appliedmaterials.com (b) the links only incorporate text and do not use any Trademarked or Copyrighted graphics; (c) the links and related content on your site do not suggest any affiliation with Applied Materials or cause confusion among consumers; (d) the links and related content on your site do not portray Applied Materials or its products or services in a false, misleading, derogatory, or otherwise offensive manner; (e) the links and related content do not contain content that could be construed as distasteful, offensive, politically partisan, or otherwise controversial; (f) the links and related content should contain materials appropriate for all ages of the general public; and (g) the links are not operated for any commercial purposes.

Safe Harbor

This Site contains certain forward-looking statements about Applied and its business and products that are subject to known and unknown risks and uncertainties that could cause actual results to differ materially from those expressed or implied by such statements, including but not limited to the sustainability of demand in the nanomanufacturing technology industry and broadening of demand for emerging applications such as solar, which are subject to many factors, including global economic and market conditions, business and consumer spending, and demand for electronic products and integrated circuits. A more detailed description of risks and uncertainties that may affect the Company's performance is available in the Company's reports filed with the Securities and Exchange Commission, available by visiting the "SEC Filings" content in the Applied Materials' Investors section. The Company assumes no obligation to update the information on this Site.

General

The above conditions apply to all visits to the Company’s Web site, both now and in the future. Again, Applied Materials may revoke, revise, modify, or change these Terms and Conditions herein at any time by updating this posting. Users should re-visit this page from time to time to review the then current Terms because they are legally enforceable.

(A) "The Applied Materials Blog" Copyrighted, Applied Materials, Inc. 2009-2011 (COPYRIGHT NOTICE)

(B) Applied Materials' Blog Terms of Use are incorporated by reference. Click here for the Blog Terms of Use.

(C) "Bright Future Card Game" Copyrighted, Applied Materials, Inc., 2007-2010 (COPYRIGHT NOTICE)

No portion of the information or materials presented within this card game on the Site or physical card series ("Bright Future Card Game") may be reproduced or otherwise exploited in any form or medium, or by any means, without the prior written permission of the Company. NO REPRODUCTION LICENSE OR PERMISSION OF ANY SCOPE IS OFFERED OR GRANTED FOR THIS GAME CONTENT PRODUCTION. Any modification, distribution, publication, transmission, display, public performance, or creation of a derivative work of any material found on the physical cards, online printable cards or other content pertaining to this series is STRICTLY PROHIBITED.

(D)"HOW WE DO IT" SERIES Copyrighted, Applied Materials, Inc., 2005 - 2010 (COPYRIGHT NOTICE)

No portion of the information or materials presented within this production series on the Site ("How We Do It") may be reproduced or otherwise exploited in any form or medium, or by any means, without the prior written permission of the Company. NO REPRODUCTION LICENSE OR PERMISSION OF ANY SCOPE IS OFFERED OR GRANTED FOR THIS CONTENT PRODUCTION SERIES. Any modification, distribution, publication, transmission, display, public performance, or creation of a derivative work of any material found on this series is STRICTLY PROHIBITED.

Trademark Notice On Behalf Of

APPLIED MATERIALS, INC.AND ITS' RELATED SUBSIDIARIES

The following are trademarks of Applied Materials, Inc. Registered trademarks have been designed by an asterisk(*) or a circled R and all other trademarks have been designated by a ™. This list may not be a presently comprehensive list of all of Applied Materials, Inc., trademarks or the trademarks of its respective subsidiaries.

A® LOGODPS CENTURA®RADIANCE®
ACUTRAN®DURASOURCE®RAIDER®
ADO®DXZ®RAPTOR™
ADVENT®EMAX®RECVD™
ADVENT SOLAR®ENABLER®REFLEXION®
AF-Mag®ENDURA®ROTARY LINE™
AKT®ESATTO TECHNOLOGY™RS/1®
AKT-APXL®ESCOSYS®RS/DISCOVER®
AKTIV®ETERNA FCVD™RS/EXPLORE®
ALLURE™EVISION™SACVD®
ALP™EXPERTCONNECT®SAPHIRE™
ALPS®EXPRESS EXCHANGE®SEMITOOL®
ALTA®EYED®SHOWER BEAM™
AMAT®FAB2FARM®SICONI®
APF®SMARTSCHED®SILVIA®
APF FUSION™SMARTWEB™SINGEN & DESIGN®
APOLLO™FACTORYWORKS®SIP ENCORE®
APPLIED®FCVD™SLAPPER®
APPLIED CHARGER®FINE LINE DOUBLE PRINTING™SLIMCELL®
APPLIED E3®FLD™SOFT LINE ™
APPLIED ENERGY™FLDP™SOKUDO®
APPLIED FABVANTAGE®FULLSCAN®SOLION®
APPLIED GLOBAL SERVICES®FULLVISION®SPARESSOLUTIONS AND DESIGN®
APPLIED MATERIALS®GUARDIAN®SPECTRUM®
FAB300®HCT®SPEEDY THINKING®
FABCONNECT®HIRES®STATIONWORKS®
APPLIED MATERIALS & DEVICE™HYDROZONE®SUNFAB®
APPLIED MATERIALS AND DEVICE™I-CONNECT & DESIGN®TECHFORCE®
APPLIED MATERIALS ENERGY™ICT®TECTRA™
APPLIED MATERIALS SERVICE™IMAP®TEMPEST®
APPLIED MATERIALS SILICON™IMASK™Terra-G®
APPLIED MATERIALS TURNING INNOVATIONS
INTO INDUSTRIES™
IMPULSE™THERMION™
APPLIED MATERIALS, INC™INSIGHT™THINK IT. APPLY IT®
APPLIED ON SERVICE®INSPIRING POSSIBILITIES™TOPBEAM®
APPLIED OPUS®INVIA™TopMet®
APPLIED SERVICE™ISANI®ToraMag®
APPLIED SILICON™ISCAN®TOTAL KIT MANAGEMENT®
APPLIED SMARTFACTORY®iSPRINT®TOTAL PARTS MANAGEMENT®
APPLIED SOLAR™ISYS®TRANSFORMA®
APPLIED SUNFAB®LAVACOAT®TreatMag®
APPLIED WELLNESS®LINK™TRILLIUM™
ARISTO®MARANGONI®TriMag®
ASPEN™MARIANA®TURNING INNOVATIONS INTO INDUSTRIES®
ATON®MIRRA®TWIN CHAMBER®
AVATAR™MIRRA MESA®Twin-AF-Mag®
AVENIR™MULTIMET®TWIN-AR-Mag®
AVILA™MULTIWEB®TWINMAG®
AXIOM®NEW ARISTO®TXZ®
BACCINI®NLIGHTEN™ULTIMA HDP CVD®
BLACK DIAMOND®OASIS CLEAN®UVISION®
BRIGHT FUTURE®OLYMPIA™VAC-MAG®
CARINA®OPTIVA™VANTAGE®
CELLWORKS®OPTOPLEX®VARIAN CONTROL SYSTEMS®
CENTINEL®P.E.T.®VARIAN POSITIONING SYSTEM®
CENTRIS™PEGASO®VCS®
CENTURA®PiVot™VECTRA IMP SOURCE®
CENTURA WXP®PiVot®VENTURA™
CHARITECH®PRECISION®VERICELL™
CIRRUS™PRECISION 5000®VERITYSEM®
C-MAG®PRECISION ETCH 8300 PL®VHP®
CONFORMA™PRIME™VIISION®
CORNERSTONE®PRIZM™VIISTA®
CPD™PRODUCER®vMask®
CRION™PRODUCER ONYX™VOLTA™
CYCLONE®PROGRESSIVE PROCESSING™VSEA®
DESICA®PROMIS®WORKMAP®
DESIGN MARK®PURITY™WORKSTREAM®
DPS®QUANTUM®WXZ®
  X BAR®

All other product and service marks contained herein are the trademarks of their respective owners.

Any questions regarding the use of these trademarks or any other legal issue can be directed to the Law Department of Applied Materials, Inc. at the following address:

Global Law Department
Attn: Trademarks
Applied Materials, Inc.
3050 Bowers Ave.
P.O. Box 58039
Santa Clara, CA 95054

You may also submit your questions or comments by e-mail to trademarks@amat.com