- Products & Technologies
- Factory Productivity Solutions
- Investor Relations
Applied Materials, Inc. Web Site User Agreement Terms and Conditions
ATTENTION: PLEASE READ THESE TERMS AND CONDITIONS OF USE CAREFULLY BEFORE USING THIS WEB SITE. IF YOU DO NOT AGREE TO THESE TERMS, PLEASE DO NOT USE THE WEB SITE.
Use of Site/Materials/Content:
The materials on this Web site ("Site") are provided by Applied Materials, Inc. (the "Company") for your personal, information, education and communication upon all the Terms of this User Agreement. The Site contains materials and other content collateral/productions relating to the Company, its products and services. The materials may be in the form of information, text, data, images, graphics, icons, animations, registered and unregistered trademarks, illustrations, photographs, audio clips, Podcasts, music, sounds, pictures, videos, Webcasts, Web-based productions, software, or other forms known or later created or invented (collectively "Content"). In using this Site, the respect of the Company's intellectual property rights outlined below is expected. Any unauthorized use of Content may violate copyright, trademark, privacy, publicity, communications and other laws, and any such use may result in your personal liability, and subject to civil and/or criminal prosecution.
Content/Copyright/Single Copy License:
All Content is copyrighted, and is either owned or used with permission by the Company. Unless otherwise expressly set forth in this User Agreement, you may not copy, publish, reproduce, replicate, distribute, transmit, modify, adapt, translate, display, sell, license, publicly perform, prepare derivative works based upon, or otherwise use or exploit the Content. Unless explicitly expressed otherwise on this Site, you may download one copy of portions of the Content in temporary storage on one personal computer for your personal, non-commercial, non-political, non-network viewing and use only, provided you do not delete or change any copyright, trademark, or other proprietary notices or markings. The foregoing limited right does not grant you any ownership in any Content. Except as expressly provided herein, nothing contained in this User Agreement may be construed as conferring to you (by implication, estoppel, or otherwise) any other right or license to any Content under any Copyright or any other intellectual property rights.
This site is controlled and operated by the Company from its offices within the United States of America. The Company makes no representation that the information available is appropriate or available for use in other locations, and access to the site from territories where their contents are illegal is prohibited. Those who choose to access the site from other locations do so on their own initiative and are responsible for compliance with applicable local laws. Users may not use or export the information in violation of U.S. export laws and regulations. Any claim relating to the information shall be governed by the internal substantive laws of the State of California.
Links to/from Third Party Web Sites:
This Site may provide links to other Web sites and access to content from third parties as a convenience to you and not as any endorsement of such third parties or their sites. The Company is not responsible for the content of any linked sites, including opinions, advice, statements, articles, and advertisements, and does not undertake any duty to correct or update such content. You bear all risk associated with the use of any linked sites or content.
You are granted a limited, non-exclusive, revocable right to create hyperlinks to this Site provided that: (a) the links are only to the Homepage of this Site; www.appliedmaterials.com (b) the links only incorporate text and do not use any Trademarked or Copyrighted graphics; (c) the links and related content on your site do not suggest any affiliation with Applied Materials or cause confusion among consumers; (d) the links and related content on your site do not portray Applied Materials or its products or services in a false, misleading, derogatory, or otherwise offensive manner; (e) the links and related content do not contain content that could be construed as distasteful, offensive, politically partisan, or otherwise controversial; (f) the links and related content should contain materials appropriate for all ages of the general public; and (g) the links are not operated for any commercial purposes.
This Site contains certain forward-looking statements about Applied and its business and products that are subject to known and unknown risks and uncertainties that could cause actual results to differ materially from those expressed or implied by such statements, including but not limited to the sustainability of demand in the nanomanufacturing technology industry and broadening of demand for emerging applications such as solar, which are subject to many factors, including global economic and market conditions, business and consumer spending, and demand for electronic products and integrated circuits. A more detailed description of risks and uncertainties that may affect the Company's performance is available in the Company's reports filed with the Securities and Exchange Commission, available by visiting the "SEC Filings" content in the Applied Materials' Investors section. The Company assumes no obligation to update the information on this Site.
The above conditions apply to all visits to the Company’s Web site, both now and in the future. Again, Applied Materials may revoke, revise, modify, or change these Terms and Conditions herein at any time by updating this posting. Users should re-visit this page from time to time to review the then current Terms because they are legally enforceable.
(A) "The Applied Materials Blog" Copyrighted, Applied Materials, Inc. 2009-2011 (COPYRIGHT NOTICE)
(C) "Bright Future Card Game" Copyrighted, Applied Materials, Inc., 2007-2010 (COPYRIGHT NOTICE)
No portion of the information or materials presented within this card game on the Site or physical card series ("Bright Future Card Game") may be reproduced or otherwise exploited in any form or medium, or by any means, without the prior written permission of the Company. NO REPRODUCTION LICENSE OR PERMISSION OF ANY SCOPE IS OFFERED OR GRANTED FOR THIS GAME CONTENT PRODUCTION. Any modification, distribution, publication, transmission, display, public performance, or creation of a derivative work of any material found on the physical cards, online printable cards or other content pertaining to this series is STRICTLY PROHIBITED.
(D)"HOW WE DO IT" SERIES Copyrighted, Applied Materials, Inc., 2005 - 2010 (COPYRIGHT NOTICE)
No portion of the information or materials presented within this production series on the Site ("How We Do It") may be reproduced or otherwise exploited in any form or medium, or by any means, without the prior written permission of the Company. NO REPRODUCTION LICENSE OR PERMISSION OF ANY SCOPE IS OFFERED OR GRANTED FOR THIS CONTENT PRODUCTION SERIES. Any modification, distribution, publication, transmission, display, public performance, or creation of a derivative work of any material found on this series is STRICTLY PROHIBITED.
Trademark Notice On Behalf Of:
APPLIED MATERIALS, INC.AND ITS' RELATED SUBSIDIARIES
The following are trademarks of Applied Materials, Inc. Registered trademarks have been designed by an asterisk(*) or a circled R and all other trademarks have been designated by a ™. This list may not be a presently comprehensive list of all of Applied Materials, Inc., trademarks or the trademarks of its respective subsidiaries.
|300works™||*ELECTRA CU®||*PRECISION 5000®|
|*"A®" Logo||*E-MAX®||*PRECISION IMPLANT 9500 xR®|
|ADVANCED PATTERNING FILM™||*ENDURA®||*PRODUCER® GT™|
|ADVANTEDGE™||*ENSURING YOUR FAB'S SUCCESS®||PULSER LAYER DEPOSITION™|
|AERA193™||ENTEK™||PURGED LAYER DEPOSITION™|
|AMPLIFY YOUR RETURN™||EXPEDITE™||REAL-TIME DISPATCHER™|
|APF ACTIVITY MANAGER™||EXTENSA™||REFLEXION GT™|
|APF REAL-TIME DISPATCHER™||*EYED®||REFLEXION LK ECMP™ & LOGO|
|*APF RTD®||FAB2FARM™||REVOLUTION & LOGO™|
|APPLIED CENTURA HART™||FAST GLASS™||SEMVISION™|
|APPLIED GLOBAL SERVICES™||FCVD™||SICONI™|
|APPLIED HARP™||FIXED ABRASIVE WEB™||SILVIA™|
|*applied materials®||FULLSCAN™||SINGEN(SiNgen) CENTURA™|
|*APPLIED MATERIALS & DESIGN®||FULLVISION™||SIP ENCORE™|
|APPLIED VARIAN VIISTA®||HCT DIAMOND SQUARER™||SMARTMOVE™|
|APPLIED VENTURES™||HONEYCOMB SOURCE™||SMART POLISH™|
|AVENIR™||INNOVATION FOR EVERYONE™||STEPSCAN™|
|AXIOM HT™||INTENCD™||SUNFAB THIN FILM LINE™|
|*BAY DISTRIBUTED STOCKER®||INVIA™||SUPER-E™|
|BECAUSE INNOVATION MATTERS™||*IPS®||SUPER K™|
|BRIGHT FUTURE™||i SCAN™||TECHFORCE™|
|CELERA™||LAVACOAT™||THINK IT. APPLY IT.™|
|*CENTURA®||MARIANA™||TOGETHER WE BREAK THROUGH™|
|CENTURA HDP™||MAXEDGE™||TOOL NEXUS™|
|CHAMBER MAINTENANCE WAFER™||MESA™||*TOTAL KIT MANAGEMENT®|
|CHARGER™||MESA CLEAN™||*TOTAL PARTS MANAGEMENT®|
|* CHARITECH®||METROLOGY SEM™||*TOTAL SERVICE SOLUTIONS®|
|CHIPRESIST™||METRON MARATHON™||*TOTAL SUPPORT PACKAGE®|
|CLEAN MODE™||*MIRRA MESA®||*TWIN CHAMBER®|
|CLEARCUT™||MXP+™||*ULTIMA HDP CVD®|
|COMMODITY CONSUMABLES SERVICE™||NANOCAD™||*ULTIMA STI®|
|CONFORMA™||NANOSEM 3D™||UNIFORM CAVITATION MEGASONICS™ (UCM)|
|*DARC®||OASIS STRIP™||*VECTRA IMP SOURCE®|
|DFINDER™||ON TO THE NEXT BREAKTHROUGH™||VERSA™|
|*DURASOURCE®||*PARALLEL WAFER PROCESSING®||*WHISPER SCAN®|
|ECMP™||P.E.T.™||WORKSTREAM CONNECTION PC™|
Trademark Notice On Behalf Of:
APPLIED FILMS CORPORATION
The following are trademarks of Applied Films Corporation
All other product and service marks contained herein are the trademarks of their respective owners.
Any questions regarding the use of these trademarks or any other legal issue can be directed to the Law Department of Applied Materials, Inc. at the following address:
Global Law Department
Attn: Robert W. Mulcahy
Applied Materials, Inc.
3050 Bowers Ave.
P.O. Box 58039
Santa Clara, CA 95054
You may also submit your questions or comments by e-mail to email@example.com